There are several methods to link spiral duct fans
The annular spiral air duct machine connects each pipe section to the spiral drainage bag in the drum, and opens a small opening in the airflow direction along the airflow direction, and the wire bundle is the drum. Install the bolt fixing in the connecting terminal ear ring.
It is mainly used for the connection of steel plate round air duct and spiral air duct. First roll each box over each pipe and shrink one end back to a small port. During installation, insert the small nozzle into the air flow direction, keep the two ends of the drum at the outer hoop, and fix the bolt in the middle of the ear ring. tighten
It is mainly used for the contact between pipes and components (such as radiator, electrostatic box side blowing, etc.). During installation, connect the hose to the outside of the connecting pipe, and then tighten the hose clamp with a special hose to automatically clean the filter element without stopping the host and other operations. When the surface saturation of the filter element reaches a certain allowable value, the automatic cleaning function is turned on, and each filter box is operated by shaking the host to prevent the dust from always being in good working condition.
No. 889, Fandi Branch Road, Jianhu Economic Development Zone, Jiangsu Province
0515 8625 5692 / 18936287016
spiral▁duct@ycsbjx.com