Importance of product positioning of automatic flange machine

If you want to expand the sales of spiral air duct machines, you must accurately position the products and determine the level of spiral air duct machines. Generally, they are divided into three types, medium size and low level. Correspondingly, the expenditure groups of spiral air duct machines are also divided into medium, medium and low levels. The classification of product level is helpful for spiral pipe manufacturers to understand the type of products to be produced, and also determines the type of flower group to which the manufacturer will sell products.

It is impossible for the spiral air duct machine to have a plan for inferior products, and the quality of low-end products is special, because if low-end spiral air duct machines are inferior products, spiral air duct manufacturers must think better and further, and the quality problem is very serious.

Manufacturers of spiral air duct machines should strive to enter the industry through their products, or become leaders in a certain field, or lead by product innovation and service quality of spiral air ducts, so as to have unique competitive advantages and achieve differentiated operations. Manufacturer of spiral duct fan

How to clean the automatic spiral air duct machine

1. Gas flushing: This saw blade cutting full-automatic spiral air duct machine delivers compressed air through the hose connecting the air duct, and is equipped with a nozzle.

If light leakage is observed on the appearance of the spiral fan, it indicates that there is air leakage and the air duct needs to be repaired.

The test method of spiral air duct machine is to slowly move from one end of the air duct to the other end of the air duct in a certain length of air duct and dark environment, using a lamp with a protective cover and an air duct whose voltage is not more than 36V and power is more than 100W, while observing the leakage of the air duct appearance.

2. Vacuum cleaner: It is operated by a hand-held vacuum suction pipe. Saw blade cutting full-automatic spiral air duct machine, use brush to directly contact the inner wall of the pipe to remove dirt. This method requires the saw blade to cut the air duct of the full-automatic spiral air duct machine with a large manhole, so that the operator can obtain as much as possible, but this method may leak some dust and dirt, because the air duct cannot form a complete negative pressure state. Sealant or other sealing measures can be adopted for air leakage places such as air duct undercut, rivet hole and flanging angle; If the flange connection leaks, tighten the nut or replace the flange gasket according to the actual situation.

3. Dynamic cleaning: remove the dirt with pneumatic or electric brush, and then clean it with gas in the same way and direction, and suck the dirt into the saw blade cutting automatic spiral tube vacuum cleaner. The requirement of this method is to be as careful as possible so as not to damage the appearance of the insulating material.